BF-1010

Digital input and output Controller

DIO controller is designed for monitor digital inputs and remote control digital outputs. BF1010 : 10 digital inputs and 10 digital outputs.
Monitor digital inputs : panic button, temperature sensor, door sensor,...etc. Remort control outputs : siren, alarm, light, fan
Setup trigger events between between terminals thru TCP/IP. For example :
If temperature in the server room is too high, triggers security office's alarm and aslo server room's air condition (outputs)
If humidity in green house is low, trigger water spray (outputs), air quality low will trigger air cycling (outputs)

Report E-map monitoring and email alert.

FEATURES HIGHLIGHTS

  • Standalone Access Controller
  • Sub-Controller, Dummy Reader modes.
  • Fingerprint / Card / Fingerprint + Card verification mode.
  • Optical fingerprint sensor module.
  • Proprietary software (SoMac) support.
  • Built-in http server.
  • BF-1010: 10 Digital Inputs And 10 Digital Outputs.
  • Monitor Digital Input: Panic Button, Temperature Sensor, Door Sensor,...etc.
  • Remote Control Outputs : Siren, Alarm, Light, Fan
  • Report E-map monitoring and email alert.
  • Master & Slave structure (Max 30 DI and 30 DO).
  • Sensor text overlay (BF1010 DIO controller with temperature / humidity / CO2 sensors, shown real room status from sensors).
  • Alarm alert (screen alerts from events - unregistered user, door open too long).
  • Setup trigger events between terminals thru TCP/IP.
  • For Example:
    (1) If temperature in the server room is too high, triggers security office's alarm and also server room's air condition (outputs).
    (2) If humidity in green house is low, trigger water spray (outputs), air quality low will trigger air cycling (outputs).

PRODUCT SPECIFICATION

Hardware
CPU 16bit / 100MHz
Memory 256 KB ROM & 1 MB SDRAM
Watch Dog System protection
Power Requirement DC 9 ~ 30 V, 500 mA
Operation Temperature 0°C ~ 55°C
Operation Humidity 5% ~ 85%RH
Storage Temperature -20°C ~ 75°C
Dimension 135 x 115 x 35 mm
Weight 525 g

Interface 
Ethernet RJ45 port 10 / 100Base-T, Half / Full duplex, Auto Cross Over, 1.5KV magnetic protected
Serial Port Interface Port Type Signals
COM1 RS-485 Screw Terminal D+, D-
COM2 RS-485 Screw Terminal D+, D-
I/O port
  • 10 Channel I/O : 10 isolated D/I an 10 isolated D/O
  • Isolated DI: Optical Isolation: 2,500VDC; Overload protection: 70VDC; Dry Contact
  • Isolated DO: Optical Isolation: 2,500VDC; Contact rating: AC: 120V@0.5A; DC: 30V@1A
  • Total switching time: 10msec
Ethernet Setting Static IP / DHCP Client / PPPoE
Serial Setting
  • Parity Check: None, Even, Odd, Mark, Space
  • Data Bits: 5, 6, 7, 8
  • Stop Bits: 1, 2 Flow Control; RTS / CTS, XON / XOFF
Operation System Windows XP / 2000 / NT / 95 / 98, Linux, UNIX
Protocol TCP, IP, UDP, Telnet, ARP, DHCP, ICMP, SMTP, PPPoE, HTTP, UNIX
Operation Mode
  • Support TCP / UDP Server, Client mode.
  • User name & Password protected for web management.
  • Bulit-in HTTP server for set up and remote management thru browsers.
  • Support system backup and restore.
  • Support Windows 95 / 98 / ME / NT / 2000 / XP / 2003 Virtual COM drivers.
Download

BF-1010 DIO Command Protocol via TCPIP

BF-1010 Catalogue

BF-1010 Installation Guide

I agree